Kỹ thuật

Thay thế van hằng nhiệt máy nén khí như thế nào?

Thay thế van hằng nhiệt máy nén khí như thế nào?

Để sửa chữa van hằng nhiệt trong hệ thống khí nén, kỹ thuật viên cần mở khoang chứa van ra để kiểm tra. Nếu thiết bị không còn hoạt động, thay thế van mới, kiểm tra lại dầu, ống dẫn dầu và hoạt động của van mới một lần nữa và đóng khoang chứa van lại.
Thay thế tách dầu máy nén khí Hitachi - Bảo dưỡng máy nén khí Hitachi

Thay thế tách dầu máy nén khí Hitachi - Bảo dưỡng máy nén khí Hitachi

Tách dầu máy nén khí Hitachi có tính năng cơ bản là phân tách dầu lẫn trong không khí dưới dạng sương dầu. Tách dầu máy nén khí có thể làm sạch nguồn khí trước khi sử dụng, làm tăng tuổi thọ của máy, độ bền được nâng cao, đảm bảo việc máy móc không bị bào mòn, han gỉ và việc vận hành máy móc trong dây truyền tốt hơn.Để tách dầu hoạt động hiệu quả thì cần phải thay thế định kỳ. Tuổi thọ của lọc dầu thường khoảng 2000 – 3000 giờ, nếu hoạt động trong môi trường khắc nghiệt, việc thay thế này có thể diễn ra sớm hơn. Trong bài viết dưới đây, Minh Phú xin chia sẻ cách thay thế bộ tách dầu máy nén khí Hitachi.
Hiện tượng keo dầu ở máy nén khí Kobelco

Hiện tượng keo dầu ở máy nén khí Kobelco

Dầu máy nén khí Kobelco có 4 chức năng chính: làm mát, bôi trơn, làm kín các khe hở trục vít tránh thất thoát khí ra ngoài và chống gỉ. Máy nén khí bị đóng keo, hay còn gọi là keo dầu là một trong những vấn đề thường gặp trong quá trình vận hành hoạt động máy nén khí. Lớp keo này thường bị keo ở các bộ phận dầu đi qua như: cụm đầu nén, két giải nhiệt, đường ống dẫn dầu… Nó thường có màu đen khét hoặc màu véc ni, rất khó tẩy rửa.
Căn chỉnh dây curoa máy nén khí Hitachi

Căn chỉnh dây curoa máy nén khí Hitachi

Việc lắp đặt, căn chỉnh dây curoa máy nén khí cần được thực hiện bởi những người có chuyên moon và kinh nghiệm. Khách hàng lưu ý rằng không nên tự thay thế căn chỉnh dây curoa . 

Compressors equipment maintenance

Thứ sáu - 21/12/2018 21:17

Each compressor requires well-timed service. Under the service means change the oil, replacement of the oil and air filter, separator, check the belt tension (if it is not the compressor with direct drive), lubrication of the bearings, different type of the valve checking, replacement of the valves if necessary. Also according to the operational manual it is necessary to replace inlet valve repairing kit, minimum pressure valve, thermostat valve and return valve. 

man hinh may nen khi micos 75, loi nhiet do cao may nen khi, bao duong may nen khi micos, sua chua may nen khi
Micos air compressor

 Types of the service include:

ТО 1:

- Cleaning of the external surfaces of the cooling oil and air modules,

- The air and oil filters replacement,

- Oil replacement,

- The thermostatic valve check.

ТО 2:

- Cleaning of the external surfaces of the cooling oil and air modules,

- Air and oil filters replacement,

- Oil replacement, motor bearings lubrication,

- The thermostat valve check,

- Separator replacement,

- The solenoid valves revision.

ТО 3:

- Replacement of all spare parts according to the ТО 2,

- The intake valve service kit replacement,

- The minimum pressure valve replacement,

- The thermostatic valve replacement,

- The belts and high pressure hoses replacement.

 According to the compressor model and brand, periods of time for services: ТО1, ТО2 and ТО3 are stated in the operational manual.  As usually, service period for the compressor equipment is 2000 working hours.

Our company advantages as service company for your compressor equipment is professionalism and continious operation of the equipment guarantee, as we are not just replace the spare parts and oil, but check all the parameters, identify the problems in advance, which can avoid emergensy stop the equipment.

Our company services compressor equipment of the following brands:Abac, DynaHanshinMicoskyungwonKobelco, Puma, Buma, Mitsui Seiki, Compair, Airpol, Aerzener, Almig, Alup, Atlas Copco, Ingersoll Rand, Kaeser, Atmos, Becker, Boge, Bottarini, Busch, Ceccato, CompАir, Demag, Dalgakiran, Domnick Hunter, Donaldson, Ecoair, Ekomak, Fiac, Fini, Gardner Denver, Hankison, Hiross, Hydrovane, Mahle, Mark, Mattei, MTA, Omi, Pneumofore, Rietschle, Rotorcomp, Ultrafilter, Worthington, WAN, Zander, Remeza etc.

Please send you requests to our e-mail address:  info.mipuco@gmail.com or contact us +84 6294 82 82.
 

Thông Tin Chi Tiết

Tổng số điểm của bài viết là: 0 trong 0 đánh giá

Click để đánh giá bài viết