NEWS

Process of technical safety audition of pressure

Wednesday - 02/01/2019 01:57

The process of technical safety inspection on average is subject to the pressure of QA: 09 - 2014 / BLDTBXH

compressed air tank see here : Download

Minh Phu provides maintenance and repair services for air compressors, in addition Minh Phu also provides spare parts for air compressors with high quality at reasonable prices. For further information, please contact (+84)919 23 28 26. Sincerely thank you for your interest and your trust of our service.

Newer articles

Older articles

Connect us

Hot news

Maintanance of Korean Micos 75 air compressor

19/08/2019

Air compressor maintenance is the entire job of cleaning the compressor and replacing consumable parts after a certain running time (3000hr or 6000hr) to keep the performance of the machine in the best state. . Checking the machine parameters must be within the allowable limits. Standard maintenance extends the life of the device and does not interrupt the operation of the machine. Minh Phu Machinery and Egineering Services Co., Ltd specializes in supplying spare parts,repairing and maintaining screw air compressors. Below are some photos of maintenance of Micos 75 Air Compressor - Korean Yujin that Minh Phu carried out.

How does compressed air filter work?

24/12/2018

Compressed air filter is a device used in compressed air system, it is responsible for filtering dirt, rust, water, lubricating oil ... To find out the working principle of Compressed Air Filter, What does the effect of filter depends on? Please read the following article:

Compressors equipment maintenance

21/12/2018

Each compressor requires well-timed service. Under the service means change the oil, replacement of the oil and air filter, separator, check the belt tension (if it is not the compressor with direct drive), lubrication of the bearings, different type of the valve checking, replacement of the valves if necessary. Also according to the operational manual it is necessary to replace inlet valve repairing kit, minimum pressure valve, thermostat valve and return valve.

Working safely with compressed air tank

02/01/2019

Safely using of compressed air tank is a very important issue, compressed air tank before being used must be tested by KTAT, registered for use following regulations. Users must hand over the managing responsibility the compressed air tank to the equipment manager in writing. Operating of thetanks is only given to people from 18 years old or older, who are physically fit and well-trained. They must be assigned by the employer in writing.

Maintenence chedule of desicant air dryer (heatless type)

30/07/2019

Compressed air system in factory plays an important role. In order to ensure the stable operation during the manufacturing process, the regulary maintenance is nescessary . However, there are many different problems in fact such as: Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduce using time of compressor accessories (air filter, oil filter, oil separator ...). On the other hand, the recommended maintenance in some factories is not seriously followed and there are deviations. To extend the life of the machine as well as compressor components and ensure operator safety Air compressors are very important to maintain regularly and technically correct.Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduced use time of compressor accessories (air filter, loc oil, oil separator ...). On the other hand, the maintenance (maintenance) recommended by the manufacturer in some factories is not guaranteed and there are deviated. To lengthen longevity of mạchine as well as compressor components and ensure operator safety , air compressors are very important to maintain regularly and technically .

Supply Hanshin NXL-3000 oil compressor

24/12/2018

Minh Phu Machinery and Technical Services Co., Ltd specializes in providing repair and maintenance services and parts: Oil, Separator, Oil Filter, Air Filter ... for Hanshin compressors.

Minh Phu machines and technical sevices Company
Address: No.24,102/72 Alley, Truong Chinh Street, Phuong Mai Ward, Hanoi
Office: No.20, 269/1 alley, Giáp Bat street, Ha Noi
Hotline: +84 24 6294 8282 - +8491 923 2826
Mã số thuế: 0106411578 (Đăng ký lần đầu: ngày 02/01/2014, thay đổi ngày 23/10/2017)

Documents

Micom Display Configuration & Operations of GRH3 air compressor

Online1,130
Today2,306
This month72,411
Total2,781,333

Air compressor

Sungshin - Korean air commpressor

Mann Filter - Compressor Filters

Piston air compressor repair

Air compressor repair

High Level MANN-FILTER Oil Filters

FilterSavvy - Mann Filter - Why Mann Filter?

Repair and mintenance of Piston air compressor

Replace compressor air end's bearing

Clean the air compressor cooler

Replace piping filter element of air compressor

Motor repair of air compressor

Pros and application of Shinmaywa air blower

Common causes and troubles of vacuum pump

Micom Display Configuration & Operations of GRH3 air compressor

Catalogue Piston Kyungwon

Atlas Copco scew air compressor catalog

Compair air compressor catalogue

Why should we use Air Filter for compressed air system?

The air compressor making loud noise

Hitachi air compressor repair

Finding the cause of air compressor error - Part 1

Process of technical safety audition of pressure

The process of technical safety inspection on average is subject to the pressure of QA: 09 - 2014 / BLDTBXH