Kỹ thuật

Quản lý dầu bôi trơn như thế nào?

Quản lý dầu bôi trơn như thế nào?

Nếu dầu máy nén khí hết độ nhớt mà không thay thế, một phần của nó bám dính vào bộ tách dầu và nhiệt tích lũy lại do quá trình oxi hóa.Luôn thay dầu bôi trơn và bộ tách dầu theo tiêu chuẩn bảo dưỡng. Dầu bẩn có thể gây ra cháy bộ tách dầu.Kiểm tra mức dầu bôi trơn bằng thang đo mức dầu trên bình dầu khi máy đang hoạt động (vận hành có tải). Bình thường nếu nó ở giữa 2 vạc đỏ. Nhiều quá khi vượt quá mức vạch đỏ trên. Dừng máy nén khí và sau đó kiểm tra xem có áp suất dư còn lại bên trong không, xả áp suất dư bằng van xả trên bình dầu vv
Màn hình  (theo yêu cầu) của động cơ “Inquire“ động cơ

Màn hình (theo yêu cầu) của động cơ “Inquire“ động cơ

Dòng đầu tiên trên màn hình của trang “ inquire” ( yêu cầu) hiện tại hiển thị giá trị dòng điện pha A, dòng thứ 2 hiện giá trị hiện tại pha B, dòng thứ 3 hiển thị pha C.
Bảo dưỡng máy sấy khí

Bảo dưỡng máy sấy khí

Thời gian bảo dưỡng máy sấy khí phụ thuộc vào chế độ vận hành và điều kiện môi trường xung quanh, khoảng thời gian dưới đây được hiểu là khuyến cáo chung.
Sự cố, nguyên nhân và cách khắc phục lỗi máy thổi khí

Sự cố, nguyên nhân và cách khắc phục lỗi máy thổi khí

Trong quá trình sử dụng máy thổi khí, sau một thời gian có thể xuất hiện một số sự cố và có hiện tượng bất thường, người vận hành và sử dụng cần phát hiện sớm và có biện pháp khắc phục kịp thời. Để giúp người vận hành và sử dụng nhận biết được điều này Công ty TNHH máy và dịch vụ kỹ thuật Minh Phú xin nêu một vài sự cố thường gặp và cách giải quyết của máy thổi khí.

Compressors equipment maintenance

Thứ sáu - 21/12/2018 21:17

Each compressor requires well-timed service. Under the service means change the oil, replacement of the oil and air filter, separator, check the belt tension (if it is not the compressor with direct drive), lubrication of the bearings, different type of the valve checking, replacement of the valves if necessary. Also according to the operational manual it is necessary to replace inlet valve repairing kit, minimum pressure valve, thermostat valve and return valve. 

man hinh may nen khi micos 75, loi nhiet do cao may nen khi, bao duong may nen khi micos, sua chua may nen khi
Micos air compressor

 Types of the service include:

ТО 1:

- Cleaning of the external surfaces of the cooling oil and air modules,

- The air and oil filters replacement,

- Oil replacement,

- The thermostatic valve check.

ТО 2:

- Cleaning of the external surfaces of the cooling oil and air modules,

- Air and oil filters replacement,

- Oil replacement, motor bearings lubrication,

- The thermostat valve check,

- Separator replacement,

- The solenoid valves revision.

ТО 3:

- Replacement of all spare parts according to the ТО 2,

- The intake valve service kit replacement,

- The minimum pressure valve replacement,

- The thermostatic valve replacement,

- The belts and high pressure hoses replacement.

 According to the compressor model and brand, periods of time for services: ТО1, ТО2 and ТО3 are stated in the operational manual.  As usually, service period for the compressor equipment is 2000 working hours.

Our company advantages as service company for your compressor equipment is professionalism and continious operation of the equipment guarantee, as we are not just replace the spare parts and oil, but check all the parameters, identify the problems in advance, which can avoid emergensy stop the equipment.

Our company services compressor equipment of the following brands:Abac, DynaHanshinMicoskyungwonKobelco, Puma, Buma, Mitsui Seiki, Compair, Airpol, Aerzener, Almig, Alup, Atlas Copco, Ingersoll Rand, Kaeser, Atmos, Becker, Boge, Bottarini, Busch, Ceccato, CompАir, Demag, Dalgakiran, Domnick Hunter, Donaldson, Ecoair, Ekomak, Fiac, Fini, Gardner Denver, Hankison, Hiross, Hydrovane, Mahle, Mark, Mattei, MTA, Omi, Pneumofore, Rietschle, Rotorcomp, Ultrafilter, Worthington, WAN, Zander, Remeza etc.

Please send you requests to our e-mail address:  info.mipuco@gmail.com or contact us +84 6294 82 82.
 

Thông Tin Chi Tiết

Tổng số điểm của bài viết là: 0 trong 0 đánh giá

Click để đánh giá bài viết