Variable Frequency Driver (VFD) -reducing energy consumpsion system is produced with the required amount of air and compressor shutdown under no-load conditions. In order to minimize unnecessary energy loss through the inverter to adjust the number spin of compressor Energy consumption saving arises starting by reducing the starting current as the inverter is operated.
Compressed air system in factory plays an important role. In order to ensure the stable operation during the manufacturing process, the regulary maintenance is nescessary . However, there are many different problems in fact such as: Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduce using time of compressor accessories (air filter, oil filter, oil separator ...). On the other hand, the recommended maintenance in some factories is not seriously followed and there are deviations. To extend the life of the machine as well as compressor components and ensure operator safety Air compressors are very important to maintain regularly and technically correct.Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduced use time of compressor accessories (air filter, loc oil, oil separator ...). On the other hand, the maintenance (maintenance) recommended by the manufacturer in some factories is not guaranteed and there are deviated. To lengthen longevity of mạchine as well as compressor components and ensure operator safety , air compressors are very important to maintain regularly and technically .
Atmospheric air always contains moisture: the higher temperature, the higher humidity is typical for the air. However, when compressed air is accumulated moisture, the water is condensing on the internal parts of the equipment and pneumatic systems. It is the case of corrosion and reduce the equipment lifetime. Therefore usually the additional air treatment equipment, like air dryer are used to avoid the accumulation of moisture in the pneumatic system.
Minh Phu machines and technical sevices Company Address: No.24,102/72 Alley, Truong Chinh Street, Phuong Mai Ward, Hanoi
Office: No.20, 269/1 alley, Giáp Bat street, Ha Noi
Hotline: +84 24 6294 8282 - +8491 923 2826
Mã số thuế: 0106411578 (Đăng ký lần đầu: ngày 02/01/2014, thay đổi ngày 23/10/2017)