Screw air compressors are in the important position in the industrial process, therefore all aggregates break and troubleshooting affect to industrial process in general and have not expected results. Screw air compressors quality and advantages are undeniable, but every mechanism is run-out eventually, some parts do not operate stably, some are out of operation.
Each compressor requires well-timed service. Under the service means change the oil, replacement of the oil and air filter, separator, check the belt tension (if it is not the compressor with direct drive), lubrication of the bearings, different type of the valve checking, replacement of the valves if necessary. Also according to the operational manual it is necessary to replace inlet valve repairing kit, minimum pressure valve, thermostat valve and return valve.
Air compressor maintenance is the entire job of cleaning the compressor and replacing consumable parts after a certain running time (3000hr or 6000hr) to keep the performance of the machine in the best state. . Checking the machine parameters must be within the allowable limits. Standard maintenance extends the life of the device and does not interrupt the operation of the machine. Minh Phu Machinery and Egineering Services Co., Ltd specializes in supplying spare parts,repairing and maintaining screw air compressors. Below are some photos of maintenance of Micos 75 Air Compressor - Korean Yujin that Minh Phu carried out.
Air compressor operation requires competence and experiences. The users may get some serious injuries in some cases. For the safety purpose, read the cautions and warning specified in the manual carefully and fully understand them for proper use.
The maintenance compressed air systems are often specified in the system documentation, provided by the manufacturer. In this artical we would like to introduce some rules and maintenance regimes according to general regulation.